ACR2000 (1-4 Axes) ISA Bus /
Standalone Motion Controller:

The ACR2000 is capable of Standalone or PC-bus
operation. It has the ability to run up to four servo
loops, with up to 4 encoders at 20MHz. It can optionally
be equipped with 8 analog inputs through a 12-bit analog/digital
converter and introduce these inputs into servo loops. Because
of our modular design to our outputs, it is possible to have
four axis of servo or four axis of stepper on the same controller.
The ACR2000 controller, like the ACR8010, uses a SIMM card
for analog outputs or stepper outputs and can be purchased as 2 or 4
axis. Of course, all of Acroloop’s systems run on the same software
and firmware, so the standard features and benefits apply to the ACR2000
as well.

The ACR2000 is Acroloop Motion Control Systems’ answer to four axis
or less affordable high performance control, when flexibility in the field,
real-time speed, and ease of programming are most needed.

ACR2000 Exclusives:

50 MHz Floating Point DSP.
4 Axes of Servo or Stepper.
Up to 4 Encoders at 20 MHz.
128K User/System Memory Expandable to 1/2 Megs each.
32 Optically Isolated 24Volt DC I/O Expandable to 288 I/O.
Half Size ISA Size.
Up to four Communication Channels. (ISA, COM1, COM2, LPT).
Optional RS232/RS485 and AcroWire IEEE-1394 Interface.

Detailed Specifications

Ordering Matrix

Suggested Accessories